日进金配资,炒股配资杠杆,股票配资怎么开户,按天配资平台

1. Pickoff method

In the process of thickness magnetization, it cannot be directly removed, because one of its main characteristics is hard and brittle. When using relatively brittle magnets, it cannot be directly removed with force, so as to avoid the damage caused by poor removal or excessive force. Once broken, it cannot be used again, and may also be injured by mistake.

2. Push method

The thick magnetized magnets need to be pushed away. If these magnets are too strong, they are easy to pinch. Push them as far as possible, and there are also ways to push them. When pushing, make sure to push it away with parallel force to avoid being squeezed or damaged by violent extrusion. Generally, the larger size magnets should be handled by the manufacturer as much as possible. Generally, the magnets will be separated by environment-friendly paper. This is to avoid wasting time and energy in the process of use, and it is also easy to hurt people. So when using the magnets, pay attention to push them away according to the specified method.

3. Resettlement method

If it is a pair of magnetized NdFeB magnets, it must be placed in pairs, and be careful when placing. Don't let it lose its magnetism. Once it loses its magnetism, it can no longer be used. At this time, it needs to be replaced.

4. Avoid collision

In the process of use, it should be noted that its material is easy to become brittle, so in the process of using it, special care should be taken to avoid collision. Once it accidentally falls to the ground, it is easy to break, or blister, so it can no longer be used.

Therefore, when using NdFeB magnets with different magnetizing methods and different magnetic strength, we should pay attention to its use. Although it is a strong magnet, it is also very fragile, so it is better to be careful.